BVTFW - U-1146 CATALYST
- MSDS: BVTFW
- Manufacturer: STERLING LACQUER MFG CO
- Product Name: U-1146 CATALYST
- National Stock Number: 8010-00F037164
Product Identification
Product ID:U-1146 CATALYST
MSDS Date:06/01/1993
FSC:8010
NIIN:00F037164
MSDS Number: BVTFW
Responsible Party
ST. LOUIS, MO 63139-1422
US
Emergency Phone: 314-776-4450
Info Phone: 314-776-4450
Preparer: P D MOORE
Cage: 60003
Contractor
Telephone: 314-776-4450
Cage: 60003
Ingredients
ALIPHATIC POLYISOCYANATE, HEXAMETHYLENE DIISOCYANATE
CAS: 28182-81-2
RTECS: NQ9170000
Fraction By Weight: 30%
ETHYL ACETATE
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 40%
OSHA PEL 1400 MG/CUM
ACGIH TLV: 400 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 25-35%
XYLENE, DIMETHYLBENZENE, XYLOL
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
684 G/L
RTECS: 9999999VO
HEXAMETHYLENE DIISOCYANATE
CAS: 822-06-0
RTECS: MO1740000
Fraction By Weight: <0.1%
ACGIH TLV: 0.005 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO THE
RESPIRATORY TRACT, NOSE, THROAT, LUNGS. EYES: SEVERELY IRRITATING,
WILL INJURE EYE TISSUE. SKIN: SENSITIZER, ALERGIC SKIN REACTION MAY
OCCUR IN SOME INDIVIDUALS. ONCE SEN SITIZED TO AN ISOCYANATE, NO
FURTHER EXPOSURE CAN BE PERMITTED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION TO THE RESPIRATORY
TRACT, NOSE, THROAT, LUNGS. EYES: SEVERELY IRRITATING, WILL INJURE
EYE TISSUE. SKIN: SENSITIZER, ALLERGIC SKIN REACTION MAY OCCUR IN
SOME INDIVIDUALS.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH AFFECTED AREA
W/SOAP & WATER. INHALATION: MOVE TO FRESH AIR. INGESTION: DON'T
INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:24F
Lower Limits:1.1
Upper Limits:13.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA W/A FULL FACEPIECE OPERATED IN
PRESSURE-DEMAND. USE WATER FOG NOZZLES TO COOL CLOSED CONTAINER.
DON'T USE WATER.
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID, CAN RELEASE VAPORS THAT
FORM FLAMMABLE MIXTURES AT/ABOVE 24F.
Accidental Release
Spill Release Procedures:WEAR RESPIRATOR, ABSORB W/VERMICULITE/OTHER
ABSORBENT MATERIAL. ELIMINATE ALL IGNITION SOURCES. STOP SPILL AT
SOURCE & PREVENT SPREADING.
Handling
Handling and Storage Precautions:STORE LARGE QUANTITIES IN APPROPRIATE
BUILDINGS. STORE IN DRY AREA. KEEP CONTAINERS TIGHTLY
CLOSED/UPRIGHT TO PREVENT LEAKAGE. (SEE SUPP)
Other Precautions:EMPTY CONTAINERS RETAIN PRODUCT RESIDUE, VAPOR,
LIQUID, SOLID. DON'T GET IN EYES/TAKE INTERNALLY. KEEP AWAY FROM
CHILDREN. AVOID SKIN CONTACT.
Exposure Controls
Respiratory Protection:A NIOSH/MSHA JOINTLY APPROVED AIR SUPPLY
RESPIRATOR. IF TLV OF PRODUCT/ANY COMPONENT IS EXCEEDED.
Ventilation:SUFFICIENT MECHANICAL (GENERAL)/LOCAL EXHAUST TO MAINTAIN
EXPOSURE BELOW TLV.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:CHEMICAL SPLASH GOGGLES, SAFETY GLASSES
Other Protective Equipment:SOLVENT IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:WASH W/SOAP & WATER AFTER USE, BEFORE
EATING/SMOKING. REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
HEXAMETHYLEN DIISOCYANTE MONOMER, CAS # 822-06-0, CONTENT <0.1% BASED
ON RESIN SOLIDS AT TIME OF MANUFACTURE. AFTER STORAGE OF 3-6
MONTHS, FREE MONOMER CONTENT MAY RISE TO MAXIMUM OF 0.3%. STORAGE
CON T'D: PROTECT FROM PHYSICAL DAMAGE. STORE BELOW 120F. FOR
INDUSTRIAL USE ONLY. DON'T STORE NEAR HEAT, SPARKS/FLAME.
Chemical Properties
Boiling Pt:B.P. Text:167-302F
Vapor Density:>1
Spec Gravity:1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID W/SOLVENT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
ALKALI METAL HYDROXIDES, SODIUM HYDROXIDE, & STRONG OXIDIZERS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, FLAME, OTHER
IGNITION SOURCES.
Hazardous Decomposition Products:CO2, CO, OXIDES OF NITROGEN, TRACES OF
HYDROGEN CYANIDE & HEXAMETHYLENE DIISOCYANIDE
Disposal
Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
ABSORBENT MAY BE DEPOSITED IN A LANDFILL IAW/LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.